lin-check is a tool for Java that checks linearizability on concurrent data structures.
|Public Maven repo||https://bintray.com/devexperts/Maven/lin-check|
NOTE: Check https://github.com/Kotlin/kotlinx-lincheck for the most recent version with extended Kotlin support.
Lin-check is a framework for testing concurrent data structure for correctness. In order to use the framework, operations to be executed concurrently should be specified with the necessary information for an execution scenario generation. With the help of this specification, Lin-Check generates different scenarios, executes them in concurrent environment several times and then checks that the execution results are correct (usually, linearizable, but different relaxed contracts can be used as well).
The artifacts are available in Bintray and JCenter. For Maven and Gradle use
com.devexperts.lincheck:lincheck:<version> artifact in for your tests. Note that 2.xxx versions are not compatible with 1.xxx.
- Lock-free algorithms testing by Nikita Koval
- Test structure
- Execution strategies
- Correctness contracts
- Configuration via options
The first thing we need to do is to define operations to be executed concurrently. They are specified as
public methods with an
@Operation annotation in the test class. If an operation has parameters, generators for them have to be specified. The second step is to set an initial state in the empty constructor. After the operations and the initial state are specified, Lin-Check uses them for test scenarios generations and runs them.
In order to specify the initial state, the empty argument constructor is used. It is guaranteed that before every test invocation a new test class instance is created.
As described above, each operation is specified via
If an operation should be called at most once during the test execution, you can set
@Operation(runOnce = true) option and this operation appears at most one time in the generated scenario.
If an operation can throw an exception and this is a normal result (e.g.
remove method in
Queue implementation throws
NoSuchElementException if the queue is empty), it can be handled as a result if
@Operation(handleExceptionsAsResult = ...) options are specified. See the example below where
NoSuchElementException is processed as a normal result.
In order to support single producer/consumer patterns and similar ones, each operation could be included in an operation group. Then the operation group could have some restrictions, such as non-parallel execution.
In order to specify an operation group,
@OpGroupConfig annotation should be added to the test class with the specified group name and its configuration:
- nonParallel - if set all operations from this group will be invoked from one thread.
Here is an example with single-producer multiple-consumer queue test:
A generator for
xparameter is omitted and the default is used. See Default generators paragraph for details.
If an operation has parameters then generators should be specified for each of them. There are several ways to specify a parameter generator: explicitly on parameter via
@Param(gen = ..., conf = ...) annotation, using named generator via
@Param(name = ...) annotation, or using the default generator implicitly.
For setting a generator explicitly,
@Param annotation with the specified class generator (
@Param(gen = ...)) and string configuration (
@Param(conf = ...)) should be used. The provided generator class should be a
ParameterGenerator implementation and can be implemented by user. From the box Lin-Check supports random parameter generators for almost all primitives and strings. Note that only one generator class is used for both primitive and its wrapper, but boxing/unboxing does not happen. See
com.devexperts.dxlab.lincheck.paramgen for details.
It is also possible to use once configured generators for several parameters. This requires adding this
@Param annotation to the test class instead of the parameter specifying it's name (
@Param(name = ...)). Then it is possible to use this generator among all operations using
@Param annotation with the provided name only. It is also possible to bind parameter and generator names, see Binding parameter and generator names for details.
If the parameter generator is not specified Lin-Check tries to use the default one, binding supported primitive types with the existent generators and using the default configurations for them.
Java 8 came with the feature (JEP 188) to store parameter names to class files. If test class is compiled this way then they are used as the name of the already specified parameter generators.
For example, the two following code blocks are equivalent.
Unfortunately, this feature is disabled in javac compiler by default. Use
-parameters option to enable it. In Maven you can use the following plugin configuration:
However, some IDEs (such as IntelliJ IDEA) do not understand build system configuration as well as possible and running a test from these IDEs will not work. In order to solve this issue you can add
-parametersoption for javac compiler in your IDE configuration.
In order to run a test,
LinChecker.check(...) method should be executed with the provided test class as a parameter. Then Lin-Check looks at execution strategies to be used, which can be provided using annotations or options (see Configuration via options for details), and runs a test with each of provided strategies. If an error is found, an
AssertionError is thrown and the detailed error information is printed to the standard output. It is recommended to use JUnit or similar testing library to run
It is possible to add several
@..CTestannotations with different execution strategies or configurations and all of them should be processed.
The section above describes how to specify the operations and the initial state, whereas this section is about executing the test. Using the provided operations Lin-Check generates several random scenarios and then executes them using the specified execution strategy. At this moment stress strategy is implemented only, but some managed strategies will be added soon as well.
The first implemented in Lin-Check execution strategy is stress testing strategy. This strategy uses the same idea as
JCStress tool - it executes the generated scenario in parallel a lot of times in hope to hit on an interleaving which produces incorrect results. This strategy is pretty useful for finding bugs related to low-level effects (like a forgotten volatile modifier), but, unfortunately, does not guarantee any coverage. It is also recommended to use not only Intel processors with this strategy because its internal memory model is quite strong and cannot produce a lot of behaviors which are possible with ARM, for example.
In order to use this strategy, just
@StressCTest annotation should be added to the test class or
StressOptions should be used if the test uses options to run (see Configuration via options for details). Both of them are configured with the following options:
- iterations - number of different scenarios to be executed;
- invocationsPerIteration - number of invocations for each scenario;
- threads - number of threads to be used in a concurrent execution;
- actorsPerThread - number of operations to be executed in each thread;
- actorsBefore - number of operations to be executed before the concurrent part, sets up a random initial state;
- actorsAfter - number of operations to be executed after the concurrent part, helps to verify that a data structure is still correct;
- verifier - verifier for an expected correctness contract (see Correctness contracts for details).
Once the generated scenario is executed using the specified strategy, it is needed to verify the operation results for correctness. By default Lin-Check checks the result for linearizability, which is de-facto a standard type of correctness. However, there are also verifiers for some relaxed contracts, which should be set via
@..CTest(verifier = ..Verifier.class) option.
Linearizability is a de-facto standard correctness contract for thread-safe algorithms. It means that an execution is equivalent to some operations sequence which produces the same results and does not avoid happens-before order. The
LinearizabilityVerifier is used by default to check for this correctness type.
The verifier lazily constructs a transition graph, where states are test instances and edges are operations. Then it tries to find a path which does not violate the happens-before order and produces same results on operations. In order not to have state duplicates, it is better to implements
Serializability is one of the base contracts, which ensures that an execution is equivalent to one that invokes operations in any serial order. The
SerializabilityVerifier is used for this contract.
Alike linearizability verification, it also constructs a transition graph and expects
hashCode() methods overrides.
Quiescent consistency is a stronger guarantee than serializability but still relaxed comparing to linearizability. It ensures that an execution is equivalent to some operations sequence which produces the same results and does not reorder operation between quiescent points. Quiescent point is a cut where all operations before the cut are happens-before all operations after it. In order to check for this consistency, use
QuiescentConsistencyVerifier and mark all quiescent consistent operations with
@QuiescentConsistent annotation, all other operations are automatically linearizable.
Alike linearizability verification, it also constructs a transition graph and expects
hashCode() methods overrides.
One more trade-off contract is suggested by T. Henzinger et al., which relaxes a data structure semantics. Instead of allowing some reorderings, they suggest to allow "illegal" by the data structure specification results, but with a penalty. This penalty is called a transition cost and then is used to count a path cost, which should be less then a relaxation factor if an execution is correct.
Look at this paper for details: Henzinger, Thomas A., et al. "Quantitative relaxation of concurrent data structures." ACM SIGPLAN Notices. Vol. 48. No. 1. ACM, 2013.
In order to describe the contract of a testing data structure, the transition costs, the path cost function and the relaxation factor should be specified.
At first, all relaxed operations should be annotated with
@QuantitativeRelaxed. The current version of Lin-Check counts a path cost using all relaxed operations, but grouping is going to be introduced later.
Then the special cost counter class have to be defined. This class represents a current data structure state and has the same methods as testing operations, but with an additional
Result parameter and another return type. If an operation is not relaxed this cost counter should check that the operation result is correct and return the next state (which is a cost counter too) or
null in case the result is incorrect. Otherwise, if a corresponding operation is relaxed (annotated with
@QuantitativeRelaxed), the method should return a list of all possible next states with their transition cost. For this purpose, a special
CostWithNextCostCounter class should be used. This class contains the next state and the transition cost with the predicate value, which are defined in accordance with the original paper. Thus,
List<CostWithNextCostCounter> should be returned by these methods and an empty list should be returned in case no transitions are possible. In order to restrict the number of possible transitions, the relaxation factor should be used. It is provided via a constructor, so Lin-Check uses the
(int relaxationFactor) constructor for the first instance creation.
The last thing to do is to provide the relaxation factor, the cost counter class, and the path cost function to the verifier. For this purpose, the test class should have an
@QuantitativeRelaxationVerifierConf(...) annotation, which is then used by
QuantitativeRelaxationVerifier. As for the path cost function,
PHI_INTERVAL_RESTRICTED_MAX are implemented in
PathCostFunction class in accordance with the past cost functions in the original paper.
Here is an example for k-stack with relaxed
pop() operation and normal
Instead of using
@..CTest annotations for specifying the execution strategy and other parameters, it is possible to use
LinChecker.check(Class<?>, Options) method and provide options for it. Every execution strategy has its own Options class (e.g.,
StressOptions for stress strategy) which should be used for it. See an example with stress strategy:
Here is a test for a not thread-safe
HashMap with its result. It uses the default configuration and tests
get operations only:
If you need help, you have a question, or you need further details on how to use Lin-Check, you can refer to the following resources:
You can also use the following e-mail to contact us directly: